home *** CD-ROM | disk | FTP | other *** search
- Path: senator-bedfellow.mit.edu!usenet
- From: Phil McAlary <mcalary@mit.edu>
- Newsgroups: comp.sys.amiga.introduction
- Subject: Xerox 4020 Color Ink Jet Printer
- Date: 15 Feb 1996 23:00:18 GMT
- Organization: Massachusetts Institute of Technology
- Message-ID: <4g0du2$is5@senator-bedfellow.MIT.EDU>
- NNTP-Posting-Host: sloanav.mit.edu
- Mime-Version: 1.0
- Content-Type: text/plain; charset=us-ascii
- Content-Transfer-Encoding: 7bit
- X-Mailer: Mozilla 1.12(Macintosh; I; 68K)
- X-URL: news:comp.sys.amiga.introduction/8499-8598#4d1h1d$pft@news2.noc.netcom.net
-
- I have a relatively Old Xerox 4020 color printer and instead of a Centronics Parallel output it has
- an RS232C output which I attach to the serial port of my Amiga 2000, OS v.2.05, 8MB ram, and hard
- drive. The Xerox manual explains several possible settings with its dip switches, baud rate, etc. I
- have tried several settings, made sure the 4020 printer driver was installed in my Amiga, but I can't
- make the Xerox print anything at all. The 4020 printer self-test works fine, but not an image out of
- my Amiga! I am not sure what baud rate, etc. to set it for. Will it work from the Amiga serial port?
- Any information would be gratefully accepted.
-
-
-